CompTIA Network + 2.3 Network Implementations – Ethernet Switching Features

Posted by:

|

On:

|

Ethernet switching features

1 / 25

To prevent multiple active paths in a network and avoid broadcast storms, which protocol should be enabled on the switch?

2 / 25

You are setting up a network where different departments should have isolated broadcast domains. Which feature would you use to achieve this?

3 / 25

Which Ethernet protocol allows multiple devices to share the same communication medium by detecting and avoiding collisions?

4 / 25

To prioritize voice traffic over data traffic in a network, which VLAN configuration would you use?

5 / 25

To combine multiple physical links between switches into a single logical link for increased bandwidth, which feature should be used?

6 / 25

To optimize the use of Ethernet frames by allowing larger packet sizes, which feature should be configured on the switch?

7 / 25

When connecting a new VoIP phone, which VLAN should you configure to prioritize its traffic?

8 / 25

To ensure that a switch port operates at the maximum possible speed and in full-duplex mode, what configuration should be applied?

9 / 25

To provide power to network devices like IP cameras and wireless access points through Ethernet cables, which feature would you enable on the switch?

10 / 25

To support larger frame sizes in a high-performance network environment, which feature would you enable?

11 / 25

In an Ethernet network, which protocol allows devices to share the same communication medium by detecting collisions and taking action?

12 / 25

To ensure efficient network management by grouping devices on the same broadcast domain, which feature should be configured?

13 / 25

To manage VLANs on your network, which IEEE standard would you use for VLAN tagging?

14 / 25

To prevent loops in a switched Ethernet network, which protocol would you enable?

15 / 25

To allow a switch port to automatically detect and adjust for straight-through and crossover cables, which feature should you enable?

16 / 25

To enable automatic adjustment of a switch port for straight-through and crossover cables, which feature is necessary?

17 / 25

To prevent unauthorized devices from connecting to a network through a switch port, which feature should you configure?

18 / 25

To manage and secure the forwarding of Ethernet frames based on device addresses, which table does a switch use?

19 / 25

To resolve IP addresses to MAC addresses within a local network, which protocol is used?

20 / 25

Which feature would you enable to monitor network traffic on a specific port for analysis?

21 / 25

To manage multiple VLANs on a switch, which IEEE standard is used for VLAN tagging?

22 / 25

You need to increase the bandwidth between two switches by combining multiple physical links into a single logical link. Which feature would you use?

23 / 25

To dynamically distribute and manage power supply to devices like IP cameras and access points, which switch feature would you enable?

24 / 25

To ensure link redundancy and improved bandwidth between two switches, which protocol would you use?

25 / 25

When devices in a network need to resolve IP addresses to MAC addresses, which protocol is utilized?

Your score is

Exit